TM 5-2420-224-20-2
B A T T E R Y B O X R E P L A C E M E N T
This task covers:
a. Removal b. Installation
INITIAL SETUP
Tools and Special Equipment:
Equipment Condition:
TOOI Kit, SC 5180-90-CL-N26
Reference
Condition Description
Materials/Parts:
Page 4-219
Batteries Removed
Washer, Lock
Page 4-172
Slave Receptacle
Removed
Nut, Lock (4)
Nut, Lock (8)
Page 4-221
Battery Cables Removed
Page 4-213
STE/lCE-R Shunt
Removed
R E M O V A L
1.
REMOVE PLATE (1).
2.
REMOVE nut (2), lock washer (3), screw (4), two clamps (5), and two CUSHIONS (6) from battery box
(7). DISCARD lock WASHER.
3.
REMOVE four lock nuts (8), four capscrews (9), and battery BOX (7). DISCARD lock NUTS.
4.
REMOVE eight lock nuts (10), eight capscrews (11), and two BRACKETS (12). DISCARD lock NUTS.
5.
REMOVE two nuts (13), shim(s) (14), four capscrews (15), two TRAYS (16), and two SUPPORTS (17).
I N S T A L L A T l O N
1.
2.
3.
4.
5.
INSTALL two SUPPORTS (17), two TRAYS (16), four capscrews (15), shim(s) (14), and two nuts (13).
INSTALL two BRACKETS (12), eight capscrews (11), and eight new lock nuts (10).
INSTALL battery BOX (7), four capscrews (9), and four new lock nuts (8).
INSTALL two CUSHIONS (6), two clamps (5), screw (4), new lock washer (3), and nut (2) on battery
box (7).
INSTALL PLATE (1).
NOTE
Follow-on Maintenance:
Install battery cables (page 4-221).
Install slave receptacle (page 4-172).
Install batteries (page 4-219).
Install STE/lCE-R shunt (page 4-213).
4-226
