TM 5-2420-224-20-2
AUXILIARY HEADLIGHT ADJUSTMENT
This task covers: Adjustment
I N I T I A L S E T U P
Tools and Special Equipment:
References:
Tool Kit, SC 5180-90-CL-N26
TM 5-2420-224-10
Personnel Required: (2)
A D J U S T M E N T
NOTE
Make sure front loader (SEE) or forklift (HMMH) and backhoe (SEE) or crane
(HMMH) are in travel position (TM 5-2420-224-10).
Make sure all tires are properly inflated and there is no load on vehicle.
Procedure is the same for both vehicles.
1.
Centerline of vehicle is located at windshield washer nozzle (1).
2.
Park vehicle 25 ft (7.63 m) from light colored wall and mark vehicle centerline on wall at floor level.
3.
To determine high-beam auxiliary headlight centerline, measure 31 in. (79 cm) at floor level in both
directions from vehicle centerline on wall and up 60 in. (152 cm) on both sides.
4-179
