TM 5-2420-224-20-2
ALTERNATOR AND ALTERNATOR BRACKET REPLACEMENT (CONT)
3.
REMOVE NUT (7) and lock
SET BRACKET (9) ASIDE
WASHER.
NOTE
Tag and mark all wires
washer (8) and
DISCARD lock
prior to
disconnecting to aid in connecting.
4.
REMOVE NUT (10) and lock washer (11) and
DISCONNECT two WIRES (12). DISCARD
lock WASHER.
5.
REMOVE NUT (13) and lock washer (14) and
DISCONNECT WIRE (15). DISCARD lock
WASHER.
6.
PULL BACK two BOOTS (16).
7.
REMOVE NUT (17) and lock washer (18) and
DISCONNECT two WIRES (19). DISCARD
lock WASHER.
8.
REMOVE NUT (20) and lock washer (21) and
DISCONNECT WIRE (22). DISCARD lock
WASHER.
9.
REMOVE two NUTS (23) and two lock
washers (24) and DISCONNECT three ground
STRAPS (25). DISCARD lock WASHERS.
4-113
