TM 11-7440-278-23P
Code
Application/Explanation
708-41/42 which is used to identify the manufacturer,
distributor, or Government agency, etc.
O- Support item is removed, replaced, used at the
e. Part Number. Indicates the primary number
organizational level.
used by the manufacturer (individual, company, firm,
F- Support item is removed, replaced, used at the direct
corporation, or Government activity), which controls the
support level.
design and characteristics of the item by means of its
H- Support item is removed, replaced, used at the
engineering drawings, specifications, standards, and
general support level.
inspection requirements to identify an item or range of
D- Support items that are removed, replaced, used at
items.
depot, mobile depot, specialized repair activity
only.
(b) The maintenance code entered in
NOTE
the fourth position indicates whether the item is to be
When a stock numbered item is
repaired and identifies the lowest maintenannce level
requisitioned, the repair part received
with the capability to perform complete repair (i.e., all
may have a different part number
authorized maintenance functions).
This position will
than the part being replaced.
contain one of the following maintenance codes: Code
Application/Explanation F-The lowest maintenance level
f. Description. Indicates the Federal item name
capable of complete repair of the support item is the
and, if required, a minimum description to identify the
direct support level.
item.
g. Unit of Measure (U/M). Indicates the standard of
H- The lowest maintenance level capable of complete
the basic quantity of the listed item as used in performing
repair of the support item is the general support
the actual maintenance function. This measure is
level.
expressed by a two-character alphabetical abbreviation
D- The lowest maintenance level capable of complete
(e.g., ea, in, pr, etc). When the unit of measure differs
repair of the support item is the depot level.
from the unit of issue, the lowest unit of issue that will
Z- Nonreparable. No repair is authorized.
satisfy the required units of measure will be
requisitioned.
(3) Recoverability code. Recoverability codes
h. Quantity Incorporated in Unit. Indicates the
are assigned to support items to indicate the disposition
quantity of the item used in the breakout shown on the
action on unserviceable items. The recoverability code
illustration figure, which is prepared for a functional
is entered in the fifth position of the Uniform SMR Code
group, subfunctional group, or an assembly.
A "V"
format as follows:
appearing in this column in lieu of a quantity indicates
that no specific quantity is applicable, (e.g., shims,
Recoverability
spacers, etc).
codes
Definition
4.
Special Information
Z-Nonreparable item. When unserviceable, condemn
and dispose at the level indicated in position
a. Usable on codes are shown in the description
3.
column. Uncoded items are applicable to all models.
F-Reparable item. When uneconomically reparable,
Identification of the usable on codes used in this
condemn and dispose at the direct support level.
publication are: Code
H-Reparable item. When uneconomically reparable,
condemn and dispose at the general support
c. The following publications pertain to the
level.
AN/MYK-8(V)1 and (V)3 and its components:
D-Reparable item. When beyond lower level repair
TM 5-4120-243-14, Air Conditioner, Horizontal
capability, return to depot. Condemnation and
Compact, 18,000 BTU, 208 V, 3 Phase, 50-60
disposal not authorized below depot level.
Hertz
(Trane
Model MAC6H18-2081201-02)
L-Reparable item. Repair, condemnation, and disposal
(Harvey W. Hottel Model CH20-6-08) (American
not authorized below depot/ specialized repair
Air Filter Model CH618-2) 208 V, 3 Phase, 400
activity level.
Hertz (Trane Model MAC4H18-208-1201-03)
c. National Stock Number. Indicates the National
(Harvey W.
stock number assigned to the item and will be used for
requisitioning purposes.
d. Federal Supply Code for Manufacturer (FSCM).
The FSCM is a 5-digit numeric code listed in SB
2
