TM 5-2420-224-20-2
FRONT LOADER REPLACEMENT (CONT)
7.
RELIEVE HYDRAULIC PRESSURE (page
2-23).
C A U T I O N
Run jack down until contact is
made with ground to prevent
damage to equipment.
8.
INSTALL front loader jack STAND.
9.
INSTALL retaining PIN.
10. REMOVE two BOLTS (5) and two lock
washers (6) from front loader mount (7).
NOTE
If front loader attachment will not
separate from mount, use pry bar
to aid in separation.
11. JACK UP UNTIL front loader ATTACHMENT
(8) IS CLEAR of front loader mount (7).
4-796
