TM 5-2420-224-20-2
REAR HYDRAULIC TANK FILTER REPLACEMENT (CONT)
C A U T I O N
Cap or plug all ports and ends
of hoses and tubes to prevent
contamination of hydraulic oil.
Failure to do so may result in
damage to equipment.
4.
DISCONNECT HOSE (8). INSTALL CAP or
PLUG.
5. REMOVE ELBOW (9) and fitting (10).
6.
REMOVE six screws (11), support (12),
gasket (13), and STRAINER (14). DISCARD
GASKET.
C L E A N I N G
Clean strainer.
I N S T A L L A T I ON
1.
2.
3.
4.
5.
6.
Procedure is
vehicles.
INSTALL STRAINER (14), new gasket (13),
support (12), and six screws (11).
INSTALL fitting (10) and ELBOW (9).
REMOVE CAP or PLUG. CONNECT HOSE
(8).
INSTALL new fluid FILTER (7) and manifold
(6).
INSTALL new gasket (5), COVER (4), six
screws (2), and six nuts (3).
INSTALL new air FILTER (1).
NOTE
Follow-on Maintenance:
Fill rear hydraulic tank (LO 5-
2420-224-12).
NOTE
the same for both
4-721
