TM 5-2420-224-20-2
O P E R A T O R S E A T F R A M E W O R K R E P A I R ( C O N T )
5.
REMOVE pin (13), LEVER (14), and spring (15). DISCARD PIN (13).
REMOVE nut (16), spring tension washer (17), and SCREW (18). DISCARD spring tension WASHER.
1.
2.
3.
4.
5.
6.
INSTALL SCREW (18), new spring tension washer (17), and nut (16).
INSTALL spring (15), LEVER (14), and new pin (13).
INSTALL two MOLDINGS (12), six new spring tension washers (11), six screws (10), and six nuts (9)
to framework (8).
INSTALL FRAMEWORK (8), four new spring tension washers (7), four screws (6), and four nuts (5) to
framework (4).
INSTALL BAR (3) in framework (4).
INSTALL KNOB (2) and pin (1).
NOTE
Follow-on Maintenance:
install operator seat and framework (page 4-437).
4-443