TM 5-2420-224-20-2
CLUTCH HYDRAULIC RESERVOIR REPLACEMENT (CONT)
4.
REMOVE nut (6), washer (7), and clutch
RESERVOIR (2).
5.
REMOVE and DISCARD PACKING (8) from
fitting (9).
6.
REMOVE HOSE (3) from clutch reservoir (2).
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
INSTALL HOSE (1) on clutch reservoir (2).
INSTALL new PACKING (3) on fitting (4).
INSTALL CLUTCH RESERVOIR (2) on clutch
master cylinder (5).
C A U T I O N
I
When performing step 4, install
washer with grooved side down.
Failure to do so will result in
breaking clutch reservoir.
INSTALL washer (6) and NUT (7) in clutch
reservoir (2). TIGHTEN NUT.
INSTALL CAP (8) on clutch reservoir (2).
CONNECT HOSE (1) to brake master cylinder (9).
CONNECT electrical CONNECTORS (10) to
clutch reservoir (2).
REMOVE CAP (8) from clutch reservoir (2).
FILL clutch RESERVOIR (LO 5-2420-224-1 2).
INSTALL CAP (8) on clutch reservoir (2).
NOTE
Follow-on Maintenance:
Install outside engine hood
4-388) .
4-16
(page
