TM 5-2420-224-20-2
CAB SHOCK ABSORBERS AND MOUNTINGS REPLACEMENT (CONT)
1.
2.
3.
4.
5.
NOTE
Procedure is the same for both vehicles except as noted.
REMOVE four lock nuts (1), four capscrews (2), two washers (3), and two SHOCK ABSORBERS (4).
DISCARD lock NUTS.
C A U T I O N
Support cab prior to removing mounts to prevent damage to equipment.
ON LEFT SIDE, REMOVE two bolts (5), lock washer (6), spring tension washer (7), and MOUNT (8).
DISCARD lock WASHER and spring tension WASHER.
REMOVE foam BLOCK (9).
ON RIGHT SIDE, REMOVE capscrew (10), lock washer (11), spacer (12), bolt (13), spring tension
washer (14), and MOUNT (15). DISCARD lock WASHER and spring tension WASHER.
NOTE
Tag supports prior to removal to aid in installation.
REMOVE two bolts (16), two lock washers (17), and two SUPPORTS (18). DISCARD lock WASHERS.
I N S T A L L A T I O N
NOTE
Procedure is the same for both vehicles except as noted.
1.
INSTALL two SUPPORTS (18), two new lock washers (17), and two bolts (16).
C A U T I O N
Support cab prior to installing mounts to prevent damage to equipment.
2.
ON RIGHT SIDE, INSTALL MOUNT (15), new spring tension washer (14), bolt (13), spacer (12), new
lock washer (11), and capscrew (10). TIGHTEN BOLT and CAPSCREW to 33 Ib-ft (45 N•m).
4-416
R E M O V AL
