TM 5-2420-224-20-2
POWER STEERING TANK (RESERVOIR) REPLACEMENT (CONT)
5.
6.
7.
8.
9.
10.
REMOVE two capscrews (11) and power
steering TANK (4).
REMOVE two nuts (12), clamp (13), and
BRACKET (14).
REMOVE roll pin (15), wing nut (16), washer
(17), seal ring (18), spring (19), and STUD
(20) from cover (21). DISCARD seal RING.
REMOVE and DISCARD GASKET (22).
REMOVE and DISCARD filter ELEMENT
REMOVE ROD (24), packing (25),
packing (26). DISCARD PACKINGS.
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
INSTALL new packing (26), new packing
and ROD (24).
INSTALL new filter ELEMENT (23).
INSTALL new GASKET (22).
INSTALL STUD (20), spring (19), new
(23).
and
(25),
seal
ring (18), washer (17), wing-nut (16), and roll
pin (15) in cover (21).
INSTALL BRACKET (14), clamp (13), and two
nuts (12).
INSTALL power steering TANK (4) and two
capscrews (11).
INSTALL SLEEVE (2) and TIGHTEN CLAMP
(10).
CONNECT TUBING (9) and TIGHTEN
CLAMP (8).
CONNECT HOSE (7) and INSTALL two new
seal rings (6) and hollow SCREW (5).
CONNECT SLEEVE (2) to tube assembly (3)
and TIGHTEN hose CLAMP (1).
NOTE
Follow-on Maintenance:
Fill power steering tank (reservoir)
(LO 5-2420-224-12).
Lower cab (page 4-418).
4-361