TM 5-2420-224-20-2
B R A K E C A L I P E R R E P L A C E M E N T ( C O N T )
I N S T A L L A T l ON
1.
2.
3.
C A U T I O N
When installing fitted screw in brake caliper, make sure it is new. Never use
fitted screw twice to prevent damage to equipment.
NOTE
• Procedure is the same for all brake calipers (except step 3).
• Insert new fitted screw on brake caliper on entrance side of brake disc.
• Washers (9) are no longer used.
INSTALL brake CALIPER (4), new fitted screw (6), standard screw (7), two new lock washers (10), and
two nuts (8). TIGHTEN SCREWS to 185 lb-ft (250 N.m).
USING WRENCH, CONNECT brake LINE (5).
INSTALL parking brake CABLE (3), screw (2), and nut (1) on rear brake caliper (4).
NOTE
Follow-on Maintenance:
Install brake disc and hub (page 4-265).
Fill clutch hydraulic reservoir (LO 5-2420-224-12).
Fill brake fluid reservoir (LO 5-2420 -224-1 2).
Bleed brake system (page 4-262).
4-275
