TM 5-2420-224-20-2
S U P P R E S S O R F I L T E R S R E P L A C E M E N T ( C O N T )
4.
5.
6.
7.
8.
C A U T I O N
Use care when performing step 4 to prevent damage to rubber cover.
ROLL rubber COVER (9) BACK from screw (10).
REMOVE screw (10), washer (11), and WIRE (12) from suppressor filter (13).
REPEAT STEPS 1 thru 5 for suppressor filter (14).
NOTE
Orientation for steps 7 and 8 is looking from rear of alternator.
ON LEFT SIDE, REMOVE two screws (15), two washers (16), and suppressor FILTER (13) from
bracket (17).
ON RIGHT SIDE, REMOVE two screws (18), two washers (19), WIRE (20), and suppressor FILTER
(14) from bracket (17).
I N S T A L L A T I ON
NOTE
Orientation for steps 1 and 2 is looking from rear of alternator.
1.
ON RIGHT SIDE, INSTALL suppressor FILTER (1), WIRE (2), two washers (3), and two screws (4) on
bracket (5).
2.
ON LEFT SIDE, INSTALL suppressor FILTER (6), two washers (7), and two screws (8) on bracket (5).
3.
INSTALL WIRE (9), washer (10), and screw (11) on suppressor filter (6).
4-236
