TM 5-2420-224-20-2
REAR COMPOSITE STOPLIGHT/TAILLIGHT REPLACEMENT AND REPAIR
(CONT)
D I S A S S E M B LY
1.
2.
3.
4.
5.
6.
7.
8.
9.
Do not
NOTE
remove retaining clip (1) from screw (2) unless screw is damaged.
LOOSEN six SCREWS (2) and REMOVE RETAINER (3) from housing (4).
REMOVE FILTER (5), lens (6), and packing (7). DISCARD PACKING.
IF DAMAGED, REMOVE INSERT (8).
REMOVE three SCREWS (9) and three lock washers (10). DISCARD lock WASHERS.
NOTE
Tag cables prior to disconnecting to aid in connecting.
DISCONNECT CABLES (11) and REMOVE two lamp HOLDERS (12 and 13), lamp HOLDER (14), and
WIRING HARNESS (15).
REMOVE four LAMPS (16, 17, 18, and 19).
REMOVE four ferrules (20) and four SPRINGS (21).
REMOVE lamp HOLDER (12) from lamp holder (13).
REMOVE three bellows (22) and lamp HOLDER (14) from lamp holder (13).
1.
2.
3.
4.
5.
6.
7.
8.
9.
INSTALL lamp HOLDER (14), three bellows (22), and lamp HOLDER (12) on lamp holder (13).
INSTALL four SPRINGS (21) and four ferrules (20).
INSTALL four LAMPS (16, 17, 18, and 19).
INSTALL WIRING HARNESS (15), two lamp HOLDERS (12 and 13), and lamp HOLDER (14) and
CONNECT CABLES (11).
INSTALL three new lock washers (10) and three SCREWS (9).
IF REMOVED, INSTALL new INSERT (8) in housing (4).
INSTALL new packing (7), lens (6), and FILTER (5) in retainer (3).
IF REMOVED, INSTALL retaining CLIP(S) (1).
INSTALL RETAINER (3) and six screws (2).
4-192
A S S E M B L Y
