TM 5-2420-224-20-2
RADIATOR REPLACEMENT (CONT)
2.
INSTALL DRAINCOCK (4), two mounts (5), two
retainers (6), RADIATOR (7), and filler (8).
3.
INSTALL two bushings (9), two clamps (10),
two new cotter pins (11), BRACKET (12), two
bolts (13), and new lock nut (14).
C A U T I O N
Prior to tightening lock nuts,
make sure radiator is 5/8-3/4
in. (16-19 mm) away from fan
b l a d e t o p r e v e n t d a m a g e to
equipment.
4.
INSTALL two washers (15), two MOUNTS
(16), and four new lock nuts (17).
5.
CLOSE DRAINCOCK (4).
6. CONNECT HOSE (18) and TIGHTEN CLAMP
(19).
7.
INSTALL two HOSES (20 and 21) and
TIGHTEN two CLAMPS (22 and 23).
NOTE
Follow-on Maintenance:
Fill cooling system (page 4-87).
Install outside engine hood (page
4-388).
4-95
