TM 5-2420-224-20-2
MUFFLER PIPES AND CLAMPS REPLACEMENT (CONT)
4.
INSTALL exhaust PIPE (8) in muffler (2).
5.
SLIDE CLAMP (9) over joint and TIGHTEN
6.
INSTALL new gasket (11), three BOLTS (12),
and three new lock nuts (13). TIGHTEN
BOLTS to 33 Ib-ft (45 Nm).
7.
INSTALL insulation BLANKET (14), two straps
(15), and two ties (16).
NOTE
Follow-on Maintenance:
Lower cab (page 4-418).
4-84
NUT (10).