TM 5-2420-224-20-2
AIR CYLINDER REPLACEMENT (CONT)
I N S T A L L A T I ON
1.
2.
3.
4.
5.
6.
INSTALL rod end CLEVIS (15) in cylinder (3) until distance between rod end of cylinder (3) and end
of rod end clevis (15), NOTED during REMOVAL, is attained. TIGHTEN NUT (16).
INSTALL adjusting nut (14) and connecting LINK (12) on cylinder (3) until distance between connecting
link end of cylinder (3) and end of connecting link (12), NOTED during REMOVAL, is attained. DO
NOT TIGHTEN NUT (13).
INSTALL
INSTALL
INSTALL
two ADAPTERS (10 and 11) in cylinder (3).
washer (9), CYLINDER (3), washer (8), and new cotter pin (7).
rod end CLEVIS (15), pin (5), and new cotter pin (4) on bracket (6).
CONNECT two air LINES (1 and 2) to cylinder (3).
NOTE
Follow-on Maintenance:
Adjust air cylinder (page 4-77).
4-75
