TM 32-5895-248-14&P
b. Column 2, Maintenance Level. The lowest level of
e. Column 5, Tools and Equipment. C o l u m n 5 s p e c i -
fies, by code, those common tool sets (not individual tools)
maintenance authorized to use the tool or test equipment.
c. Column 3, Nomenclature. Name or identification of
and special tools, Test, Measurement, and Diagnostic Equip-
the tool or test equipment.
ment (TMDE), and support equipment required to perform
d. Column 4, National/NATO Stock Number. T h e
the designated function.
National Stock Number (NSN) of the tool or TMDE.
f. Column 6, Remarks. This column shall, when appli-
e . Column 5, Tool Part Number. T h e
manufacturer's
c a b l e , contain a letter code, in alphabetical order, which
p a r t number.
s h a l l be keyed to the remarks contained in Section IV.
D-5
EXPLANATION
OF
COLUMNS
IN
REMARKS,
D-4 EXPLANATION OF COLUMNS IN TOOL AND
SECTION IV.
TEST EQUIPMENT REQUIREMENTS, SECTION III.
a. Reference Code. The code recorded in Section II,
column 6.
a. Column 1, Reference Code. The tool and TMDE
b. Remarks. This column lists information pertinent to
r e f e r e n c e code correlates with a code used in the MAC,
the maintenance function being performed as indicated in
Section II, column 5.
the MAC, Section II.
D-2
