TM 11-7440-278-14
(9) Remove the eight bolts that secure the
(5)
Remove the lockring from inside the
cylinder bracket to the floor.
housing.
(10) The cylinder and bracket cannot be re-
(6)
Remove the seals with needle nose
moved from the van.
pliers.
b. Seal Removal.
CAUTION
(1) Set cylinder on its end, with clevis
Note the precise position of the seals
pointed upward.
prior to removal so that new seals are
(2) Remove
clevis
by
turning
identically placed.
counterclockwise.
(7) Replace the seals by reversing the
(3) Remove three allen head screws from
above procedure. Refer to the applicable technical
the cylinder seal housing.
manuals listed in appendix A for direct support
(4) Pull the seal housing upward and
maintenance instructions covering other equipment
away from the cylinder and shaft.
comprising the AN/MYK-8 (V) (*).
6-9
