TM 11-7440-232-12/NAVELEX 0967-LP-275-5010
CHAPTER 5
ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
5-1. COMMON TOOLS AND EQUIPMENT.
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE)
applicable to your unit.
5-2. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
No special tools or equipment are required.
5-3. REPAIR PARTS
Repair parts are listed and illustrated in the repair parts and special tools list TM-11-7440-232-20P covering
organizational maintenance for this equipment.
Section II. SERVICE UPON RECEIPT
5-4. SERVICE UPON RECEIPT OF MATERIEL
a. Unpacking
Do not unpack the digital data modem until the rack mounting position in the system assemblage is
installed, wired, and ready (5-5, INSTALLATION).
Inspect the shipping container of Digital Data Modem MD-701(*)IUY for evidence of damage that may have
occurred in transit.
Open the container according to the instructions on the shipping container.
When packed for shipment, the components of the MD-701(*)/UY are placed in an inner carton. A
moisture-vaporproof barrier is placed around the Inner carton. This package is placed in an outer carton.
The outer carton is covered with a second moisture-vaporproof barrier and placed in a wooden packing box.
The dimensions of the wooden packing box are 17 inches deep, 13 inches wide, and 93/4 inches high. The
weight of the packed equipment is 20 pounds.
To remove contents:
NOTE
When unpacking equipment that is pocked only in cartons, omit the procedure given in (1)
through (3) below.
WARNING
Prevent personal injury when applying or removing steel strapping by wearing heavy gloves and
protective eye wear. Do not handle packing cartons by the steel strapping. Don't take chances.
Avoid personal injury. MD-701B/UY is heavy-- it weighs 50 pounds. Use two men to lift.
5-1
