CAB TILT AND LOWER (CONT)
Procedure is the same for both
vehicles except as noted.
LOOSEN CLAMP (1) and DISCONNECT air
intake BELLOWS (2).
M a k e s u r e f r o n t w h e e l s a re
centered before performing step 2.
REMOVE nut (3) and SCREW (4) and
DISCONNECT steering COLUMN (5) by
PULLING UP on steering wheel. DISCARD
LOOSEN two SCREWS (6 and 7) on
alternator bracket (8).
MOVE ALTERNATOR (9) toward engine and
TIGHTEN two SCREWS (6 and 7).