SLAVE RECEPTACLE REPLACEMENT
This task covers:
a. Removal b. Installation
I N I T I A L S E T UP
Tools and Special Equipment:
Tool Kit, SC 5180-90-CL-N26
Nut, Lock (2)
R E M O V A L
REMOVE two screws (1), two spring tension
washers (2), and COVER (3). DISCARD
spring tension WASHERS.
Tag leads prior to removal to aid
DISCONNECT two LEADS (4) from slave
REMOVE four nuts (6), four screws (7), and
slave RECEPTACLE (5).
REMOVE two screws (8), two lock nuts (9),
and BRACKET (10). DISCARD lock NUTS.
I N S T A L L A T I ON
INSTALL BRACKET (10), two screws (8), and
two new lock nuts (9).
INSTALL slave RECEPTACLE (5), four screws
(7), and four nuts (6).
CONNECT two LEADS (4) to slave receptacle
INSTALL COVER (3), two new spring tension
washers (2), and two screws (1).
Connect batteries (page 2-24).