HYDRAULIC SUSPENSION LOCKOUT CONTROLS REPLACEMENT
This task covers:
a. Removal b. Installation
I N I T I A L S E T UP
General Safety Instructions:
Tools and Special Equipment:
Tool Kit, SC 5180-90-CL-N26
Passenger Seat and
W A R N I N G
Remove or disconnect batteries
a n d t u r n v e h i c l e M A S T E R
disconnect switch OFF prior to
p e r f o r m i n g m a i n t e n a n c e i n
i m m e d i a t e b a t t e r y a r e a o r
working on electrical system.
S u c h d i s c o n n e c t i o n s p r e v e nt
electrical shock to personnel or
R E M O V A L
Tag all connector bodies prior to disconnecting to aid in connecting.
DISCONNECT CONNECTOR body (1) from light socket (2).
REMOVE nut (3), lens (4), washer (5), lamp (6), nut (7), washer (8), and light SOCKET (2) from
mounting plate (9).
DISCONNECT CONNECTOR body (10) from rotary switch (11).
REMOVE knob (12), nut (13), and rotary SWITCH (11) from mounting plate (9).
PRY COVER (14) off fuse box (15).
Tag leads prior to disconnecting to aid in connecting.
DISCONNECT two LEADS (16) from fuse box (15).
REMOVE two screws (17) and fuse BOX (15).
REMOVE RELAY(S) (18) by pulling straight up.
IF DAMAGED, REMOVE two screws (19), DISCONNECT relay plug HARNESS (20), and REMOVE
four screws (21) and mounting PLATE (9).