FAN BELT ADJUSTMENT
This task covers:
I N I T I A L S E T UP
Tools and Special Equipment:
TooI Kit, SC 5180-90-CL-N26
Outside Engine Hood
Loosen two screws (1 and 2).
Move alternator (3) outward to tighten belt to
tension limit of approximately 1/2 in.
Tighten two screws (1 and 2).
Check belt tension. If necessary, repeat steps
1 and 2 to maintain 1/2-in. tension limit.
Install outside engine hood (page
A D J U S T M E N T