Figure 2-24 (ENTER SOI/CEOI/f1, f1, f4, f3)
Once <f2> is selected, provide a separation factor for the cosite plan. Enter
the desired separation factor in the range 0.5-5.0 MHz. The separation factor
must be divisible by 0.5 MHz.
Next, a screen with a triangular arrangement of
columns for entering cositing information appears.
Up to 50 cosite groups may
An example of this screen is shown in Figure 2-25.
Figure 2-25 (ENTER SOI/CEOI/f1, f1, f4, f2)
Nets are entered using the nets DESC ID number. The first column is used for
The remaining spaces on the same line are used for the nets to be
separated from the base net.
The nets entered for separation have their